Guide · Superinvestors and 13F filings
13F changes explained: new, added, reduced and sold
Updated
13F changes are not reported by the manager; they are worked out by comparing two filings. A position is new if absent last quarter, added or reduced if its share count rose or fell, and sold if it disappeared. Share counts are compared, not values, because a value moves with the price. Splits must be adjusted for first.
Key takeaways
- No 13F says what was bought or sold: changes come from comparing a filing with the previous one.
- Compare share counts, never values; a position's value changes every day with the price even if nothing was traded.
- A stock split looks like a purchase unless the earlier share count is adjusted for it.
- A spin-off, merger or new security number can look like an exit and a new position.
- The dollar size of a move is an estimate at the quarter-end price, not what the manager paid or received.
On this page
How 13F changes are worked out
A 13F filing lists holdings; it does not list trades. Every "new", "added", "reduced" or "sold" label you see on a superinvestor page is derived by setting the latest filing beside the previous one and comparing the two, security by security. The comparison has four outcomes:
| Label | Previous filing | Latest filing |
|---|---|---|
| New | Not held | Held |
| Added | Held | More shares |
| Reduced | Held | Fewer shares |
| Sold | Held | Not held |
A fifth outcome, unchanged, means the share count is identical. Securities are matched by their CUSIP, the nine-character identifier each line of a 13F carries.
Share count, not value
The comparison has to use share counts. A 13F's value column is the share count times the closing price on the quarter's last trading day, so it moves with the market whether or not the manager trades.
A worked example, with a hypothetical manager and stock:
| Q1 filing | Q2 filing | |
|---|---|---|
| Shares | 100,000 | 100,000 |
| Quarter-end price | $50 | $60 |
| Reported value | $5,000,000 | $6,000,000 |
The value rose 20%, but nothing was bought: the position is unchanged. Now suppose the Q2 filing reports 120,000 shares at $40 instead. The value falls from $5,000,000 to $4,800,000, yet the manager added 20,000 shares, a 20% increase in the share count.
The percentage change on a position is the change in shares divided by the earlier share count: (120,000 − 100,000) ÷ 100,000 = 20%. A position that goes from 100,000 to 25,000 shares was reduced by 75%.
How big was the move?
A share count says how many shares changed hands, not at what price. Funkfolio sizes a move at the price the latest filing implies for the period end, value divided by shares. In the second example that is $40, so the 20,000 shares added are sized at $800,000. A new position is sized at its whole reported value. A position sold out is sized at its value in the previous filing, because that is the last price the filings give for it.
Each of these is an estimate. The manager might have bought those 20,000 shares at $55 in April or at $38 in June; the filing does not say. Funkfolio also shows each move as a share of the reported portfolio, which helps tell a token trim from a decision that reshaped the book.
Splits, spin-offs and changed identifiers
Stock splits. In a 2-for-1 split each share becomes two. A manager that held 100,000 shares before and traded nothing reports 200,000 after. Compared naively, that reads as a 100% addition. The fix is to put the earlier count on the same footing first: multiply it by the split ratio (2 for a 2-for-1 split, 0.1 for a 1-for-10 reverse split), then compare. Funkfolio does this where a split is on record, and its method note says so.
Spin-offs and mergers. A spin-off gives holders shares of a new company they never bought, which appears as a new position. A share-for-share merger turns one company's shares into another's, which reads as an exit from one and a new position or addition in the other. Funkfolio's about page states that a spin-off or a share-for-share merger can still read as a new position or an exit.
New identifiers. When a company's CUSIP changes, for example after a reorganization, a plain CUSIP match sees one exit and one new position. Where the ticker shows both lines are the same company, Funkfolio drops the false exit and leaves the change unmeasured, because the two share counts may not be in the same units.
Amendments. A manager can correct a filing with a 13F-HR/A. A restatement replaces the original report, and the comparison should use the corrected table. Funkfolio applies restatements and amendments that add new holdings before comparing.
Why "sold" is not always a sale
"Sold" means a security has gone from the latest filing. A complete sale is the usual reason, but not the only one:
- the position fell under the form's small-position exemption (fewer than 10,000 shares and less than $200,000 in value), which a manager may omit;
- the manager asked the SEC to treat the holding as confidential, which can keep it out of the public filing for up to a year at a time;
- the security was merged into another one or delisted from US trading.
And because 13Fs are snapshots at quarter end, a stock bought and sold within one quarter never shows up as a change at all.
What a change does and does not tell you
A change tells you that, between two quarter ends, a manager's reported share count moved. It does not tell you why. A reduction can be profit-taking, a response to client withdrawals, a rebalance after a price rise, or the manager changing their mind. An addition can be conviction or a fund receiving new money. Short positions and options written are not on the form, so a "reduced" long may sit alongside a hedge the filing does not show.
Where to see changes on Funkfolio
Each investor page lists the latest filing's changes beside each holding, and the investor's history pages show earlier quarters. Across all tracked investors, activity lists every move largest first, buys and sells rank stocks by how many investors bought or sold them, and most-owned shows who holds what now. For the timing of filings, see 13F deadlines; for what a filing omits, how to read a 13F portfolio.
Questions and answers
What does 'added' mean on a 13F?
It means the manager reported more shares of the security than in its previous 13F filing. The filing itself does not say so; the change is worked out by comparing the two share counts. Added does not tell you when in the quarter the shares were bought or at what price.
Why compare share counts instead of values?
Because a position's reported value is shares times the quarter-end price. If the price rises 20% and the manager trades nothing, the value rises 20% too. Only a change in the share count shows that the manager actually bought or sold.
How do stock splits affect 13F changes?
After a 2-for-1 split, a manager who traded nothing reports twice as many shares. Unless the previous quarter's count is doubled first, the position looks like a 100% addition. Funkfolio adjusts the earlier count where a split is on record.
Does 'sold' mean the manager sold everything?
It means the security no longer appears in the latest filing. Usually that is a complete sale, but a position can also disappear because it fell below the form's small-position threshold, was moved into a confidential request, or was converted into a different security by a merger.
Sources
- Frequently Asked Questions About Form 13F — U.S. Securities and Exchange Commission, Division of Investment Management. Accessed .
- Form 13F: Information Required of Institutional Investment Managers (form and instructions) — U.S. Securities and Exchange Commission. Accessed .
Live data and tools
Cite this page
Funkfolio, “13F changes explained: new, added, reduced and sold”, data as of 12 November 2026. https://funkfolio.com/learn/superinvestors/13f-changes-explained
General information, not investment advice.